 |
Tests all functional test parameters of Hydraulic valve blocks. |
|
|
These valve blocks are tested for very low leakage values with very high pressure hydraulic fluid. |
|
The pumping module with 5 pumps and Pump control consoles are located in a remote location. |
|
All ports of the valve are sealed and tested automatically by fixtures and very minimum manual preparation of the test part is required. |
|
This equipment is controlled by a PLC and PC control console. |
|
All leakage parameters are recorded and analyzed for test results. |
|
All Test parameters are recorded and stored with reference to the test part serial no. |
|
This test stand is in a production environment. |
|
